Head restraints are provided for all seats.
Front seats and rear outboard seats

Rear center seat
Head restraints cannot be adjusted or removed.
â– Removing the head restraints
Pull the head restraint up while pressing the lock release button.
If the head restraint touches the ceiling, making the removal difficult, change the seat back angle or, if possible, the seat height.

â– Installing the head restraints
Front seats
Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint

Rear outboard seats
Align the head restraint with the installation holes and push it down to the lowest lock position while pressing the lock release button.

â– Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.

| WARNING â– Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Engine Coolant Pump Overspeed (P26CE37)
DESCRIPTION Refer to DTC P26CA12. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P26CE37 Engine Coolant Pump Overspeed The speed of the water inlet housing with water pump sub-assembly is a certain value or more when an operation request signal is being output ...